3-in-1 sweep + vacuum + dust-mop

PUDU MT1 Vac — three modes, one pass.

Sweep, vacuum, and dust-mop in a single cycle. Designed for mixed-surface commercial venues with high pedestrian traffic. IPX3 spray-resistant.

PUDU MT1 Vac 3-in-1 sweep vacuum mop cleaning robot

Specs at a glance

Modes
Sweep · Vacuum · Dust-mop
Coverage
Up to 1,400 m²/h
Travel speed
0.2–1.2 m/s
Battery
60 Ah · 3–6.5 h · <3.5 h charge
Capacity
Dustbin 14 L (7×2) · Trash 6 L
Navigation
VSLAM + Marker + LiDAR · IPX3

Where it fits

  • Mixed carpet/hard-floor facilities
  • Hospitality public areas (hotels, lobbies, lounges)
  • Educational institutions (libraries, classrooms, hallways)
  • Mid-size retail with daily foot traffic

Frequently asked

What does MT1 Vac do that MT1 doesn’t?

MT1 Vac adds vacuum and dust-mop to the sweep cycle. Same pass picks up debris, vacuums fine dust, and dry-mops for an additional polish. MT1 is sweep-only with a much larger 35 L bin.

Will it work on carpet?

Yes — for low-pile commercial carpet (vacuum mode). Not designed for shag or thick residential carpet. We confirm during the assessment.

What does IPX3 mean here?

Spray-resistant to water from any angle up to 60° from vertical. Safe to wipe down between cycles, but don’t pressure-wash.

How much can it pick up before emptying?

14 L dustbin (split as 7 L × 2 chambers) and a 6 L coarse-trash bin. For 8-hour overnight runs in retail / hospitality this typically covers a full cycle without intervention.

Should I get MT1 Vac or CC1 for my facility?

CC1 is wet-process (sweep + scrub + vacuum + mop with water/detergent, 1,000 m²/h). MT1 Vac is dry sweep + vacuum + dust-mop, 1,400 m²/h, no water tanks. CC1 for floors that need wet cleaning; MT1 Vac for daily dust + traffic management.

See the MT1 Vac live in Mundelein.

Watch all three modes (sweep, vacuum, dust-mop) operate in a single pass. 15 minutes from the office, by appointment.